Hoaxblog.com

After lots of tries, i have finally got success to route my traffic via my windows vps This method also should work with Windows Dedicated Servers.

For windows VPS, contact your provider to enable “NAT” for your vps. They should do this for you. After they are done, Go to Start >> RUN >> Type “services.msc”

On the services list, select “Routing and Remote Access” and go to properties. Make the startup type automatic and apply. After that you should have the option to “Start” this service. Start this service as we are going to use this service basically to route our traffic

Now go to Start >> Settings >> Control Panel >> Administrative Tools >> Click on the shortcut says “Routing and Remote Access”. It should open the configuration panel of Routing and Remote Access.

Now right click on your computer name the click the option says “Configure and Enable remote and routing access”. Before doing this, make sure your Firewall service is stopped and disabled.

Now on the configuration wizard click Next to proceed >> In the configuration list select “Custom Configuration”, Press Next >> Select VPN Access & NAT and Basic Firewall Option, Press Next >> Now press Finish to end the wizard

This wizard should enable the PPTP & L2TP VPN access to your firewall with private routing capability. Now you need to configure your VPS to route the private Traffic to the Public Interface. To do this, we need to have any of the following two:

1. Two network interface to route one to another. or
2. We can use NAT (Network Address Translation) using the Microsoft Loopback adapter.

We will basically work with the 2nd one as most of the dedicated servers/vps don’t come with two network interfaces. To continue with the NAT configuration, go to the Routing and Remote Access panel >> Expand ComputerName (Local) >> Expand Ip Routing >> You should find a option says “NAT/Basic Firewall”. Simply right click on that option and use the New interface to add network translation. Now first add the Inferface says “Internal” which is basically for private network access with default settings and on second attempt add your main adapter to the NAT list and select the options says “Public Interface connected to this inferface” and select the option says “Enable NAT on this interface”.

Now your network should have the address translation working, that means your private requests should be now translated and you can use this VPN as your internet gateway

Now to allow your users to use VPN, add a new user and from the properties allow its Dial In permission. User with Dial-In permission should be able to login using VPN

I m not really explaining how to configure the client as its available in most probably all over the net. Unfortunately, what is not available is how to do the vpn server configuration. I took few of my important minutes to write down this tutorial, and i believe knowledge is power and everyone should share this So Thank me now

Windows 2008 has made few enormous development over windows 2003. One of the most important change they have made is integration of IPSec and Windows Firewall both at once. Now with windows firewall, you can block an IP address from accessing your windows server or filter your Tcp/IP requests. I was trying to find a way to block ips using windows and i failed to configure IPSec Manually, so i thought to give this a try. First time, i got blocked by my own server, and had to IPMI my server to fix this :P, but finally, i got this working

To do this Ip filtering, go to “Server Manager” of Windows 2008

Here under the configuration menu there is a option for Windows Firewall, if you expand it, you will get “Inbound Rules”.

Right click on “Inbound Rules” and click “New Rule”

On the “Rule Type” select “Custom” press ‘Next’

Now, select the option “All Programs” and press ‘next’

For protocol, keep “Any” and press “next”

In this box, keep the first one marked as “All IP addresses” for local IP options.

On the remote IP box, select “These IP addresses” and use the ADD button to add your IP addresses in the blacklist.

Now press next, put a name for the ruleset and finish. You are done. To add more IPs in the list, just edit the custom ruleset from all inbound rules by right clicking on it and select properties. Go to the “Scope” tab and add new IPs in the “Remote IP” box to block them.

Its really the best and easy way to block ip addresses without manually configuring a IPsec policy. Basically, it uses the integrated IPsec policy of Windows firewall and works perfect!

So start blocking intruders

Yeah, still i believe Microsoft got the world’s best idea and marketing seeds in operating system world. They proved this again by suppling windows server 2008. I got my first windows 2008 server from softlayer. I m currently using it for my Free File Hosting service. The new server really rocks in many ways. One of most common vulnerability is fixed by microsoft (Basically taking the linux technique) is, now the services like apache and others are no more run under “System”. Which fixes most of the common worm/trojan attacks who attacks the system first to hide themselves. The same theory is also applied for Windows Vista. Designing and component design with far process monitoring capability with visualize system made windows server 2008 better then other windows server editions. Though, for server version, Linux is a bit ahead comparing with windows server 2008 as linux is faster, most of the web based modules are specially developed for linux and linux uses less resources. But still i have to say the approach taken by Microsoft is really good, and it should bring more business for them. They are may be coming in the server market with wide range of possibilities very soon to compete with linux more efficiently

My File Hosting is really doing awesome It has made 29$ today. I m using my windows UK Vps to host the files and till far only 3.5 GB of the space is used. As it looks like the file hosting business is expanding and i m quite near to my targetted amount, i m also looking for expanding this cool thing. Just found that my base camp of server (Softlayer) is giving windows 2008 servers. And the web edition of windows 2008 is giving for free So i may be taking a Opteron Windows 2008 server with reduced pricing very soon to expand my file hosting business. I have found this that, the vps is getting hogged few times in the day as its getting overloaded from last two days. Most probably i m loosing some more money for this too May be its the time to move and get some bigger cash from file hosting.

I have found two nice webhosting services in UK. One of them is WebhostingUK and another one is eUkhost. Both are run by the same authority and from the same network “PoundHost” from England. I have used both services for my windows vps and found both are quite stable and provide legitimate bandwidth for both down and uplink. I do have to say, they are not one of the oversellers i have found till far like CheapVPS. Most of the CheapVPS nodes are oversold and hangs too frequently in a range of week, while i haven’t found such problem in none of the two services recommended. I was using EukHost first time, though i have moved to WebhostingUK later on for its legitimate pricing range comparing with EukHost. The only negative side i have found of WebhostingUK/EukHost is there pricing. Its a bit high comparing with any US VPS services. Though, i have to say, their service is awesome and will give you real pleasure of running windows vps.

In recent times, i bought a windows vps to hold my remote desktop facility and running a file hosting site to earn some bucks from warez As i wasn’t familiar with windows server, it looks like total crap to me. Most probably in the world, the best addons for desktop have been created for windows and when it concerns regarding server, then its definitely LINUX. Although, as there are file types factor in windows, you cant create a file with . in front as windows will always say you to put a file name. To make windows understand to include the . with the filname you just need to put double quote in both end while saving the file. Putting the following while saving the file should create a .htaccess file in windows:

".htaccess"

To tell you the truth, windows really sucks when web server concerns